Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers. 

Discover the perfect synthesis of modernity and tradition: light switches with toggle levers in the retro switch collection Cambridge offers exclusive design, away from the mainstream. ROHDE+ROHDE toggle switches take up old traditions and implement them in a contemporary way. They were designed for discerning customers who are looking for something special. The best thing about it? Each retro light switch can be individually designed and thus stands out from other light switches. Make a statement with ROHDE+ROHDE retro switches.Individual retro light switches:All front panels for retro light switches are made individually for each order. You can choose from different sizes and colours or contact us to discuss special requests. Due to the individual production of the retro switch front panels, the delivery time is slightly longer. Toggle light switch in 1001 colours: All front panels and frames from ROHDE+ROHDE are "back-lacquered" by hand. From the front, you see a "glass-typical" glossy and modern surface that is easy to clean. The lacquer layer remains protected on the back. (In the case of black front panels for retro light switches, we use through-dyed material to achieve an optimal look).If the retro light switches and sockets are in the same colour as your walls, the overall picture is particularly harmonious. Light switches and sockets blend discreetly into the background.  We offer coloured front panels for toggle light switches in over 1000 colours to choose from, including original Farrow & Ball or Little Greene colours as well as all RAL and NCS colours. If you have any other colour requirements, please do not hesitate to contact us.Please note that colour representations on monitors are inadequate and may deviate from the original. We therefore recommend that you use e.g. a colour fan for colour selection if necessary.High-quality light switch in retro design:All front panels of the ROHDE+ROHDE retro design light switches are manufactured in the factory in Germany. Give your home a touch of elegance with these light switches, which can also be found in luxurious 5-star hotels. Retro switch front panel material:The development team of ROHDE+ROHDE has opted for high-quality synthetic glass, which offers several convincing advantages. Retro switch front panels are thus 11 times more break-resistant than window glass, scratch-resistant and protect the coloured "rear glass lacquer" with its integrated UV filter from light-induced colour changes. The synthetic glass shows virtually no inherent colouring and has already proven itself thousands of times over to ensure that your new retro switches still look as beautiful as on the first day, even after years of use. Installation:After the retro-switch mechanism with toggle lever has been installed in the wall box, the retro-switch front panel is simply pushed on and pressed tight. A specialist is not necessary for this. The front panel is held securely to the wall by means of a latching mechanism. If necessary, it can be removed again with a moderate amount of force.Scope of delivery:Frontblende für Retro-Lichtschalter in der Größe und Farbe Ihrer WahlInstallation materialInstructionsLight switch manufacture ROHDE+ROHDE:The individual production of retro light switches takes place in the family-run light switch manufactory ROHDE+ROHDE in Potsdam near Berlin. The switch ranges from ROHDE+ROHDE are individually manufactured to order for all customers.