The innovative FreeTouch® sensors from ROHDE+ROHDE make it possible to switch the light without any touch. Simply holding your hand a few centimeters in front of the touchless light switch is sufficient. Through various materials (excluding metal), the sensor can detect the hand and reliably trigger the switching process. Technical specifications:Capacitive sensor with integrated relay. Maximum load: 2400W. Minimum load: 0W. 240V / 50 Hz. 10A. Not potential-free. Input and output voltage: 230V-240V. Neutral wire is required (3-wire connection). Standby power consumption is only approximately 0.22W. Can be mounted into an existing standard EU round wall box of 68 mm, either using expansion clips or screws. Two-way switch / Three-way switch:Do you want to control a lamp from 2 or 3 locations? Then we're talking about a two-way switch (2 control points) or a three-way switch (3 control points).Procedure: Install 1 FreeTouch® light switch as the "Master," product number FT-S-230. You can connect 1, 2, or as many FreeTouch® two-way/three-way switches as "Slaves" to the Master (product number FT-X-230). Each control point behaves like the "Master" (light switch). Important: It's not possible to connect a FreeTouch® sensor with another brand, such as a conventional rocker switches.Please order the front panel / cover separately.PACKAGE CONTENTS:1 FreeTouch® Sensor FT-S-230. Integrated relay 230V. On/Off function.Installation manual.

The modern FreeTouch® sensors from ROHDE+ROHDE allow you to control the brightness of the light ("dimming") without any physical contact. Simply hold your hand a few centimeters in front of the touchless dimmer. Through various materials (excluding metal), the sensor will detect your hand. Adjustable Mode 1:Maximum 300W for conventional dimmable light sources (halogen, incandescent bulbs, etc.).Maximum 120W for dimmable LED and dimmable energy-saving lamps.Minimum 0W.Requires neutral wire (3-wire connection).Adjustable Mode 2:Maximum 300W.Minimum 40W.Only for conventional dimmable light sources (halogen, incandescent bulbs, etc.).No neutral wire required. Can be mounted into an existing standard EU round wall box of 68 mm, either using expansion clips or screws. Two-way switch / Three-way switch:Do you want to control a lamp from 2 or 3 locations? Then we're talking about a two-way switch (2 control points) or a three-way switch (3 control points). Procedure: Install 1 FreeTouch® dimmer as the "Master," product number FT-D-230. You can connect 1, 2, or as many FreeTouch® two-way/three-way switches as "Slaves" to the Master (product number FT-X-230). Each control point behaves like the "Master" (dimmer). Important: It's not possible to connect a FreeTouch® sensor with another brand, such as a conventional rocker switch. Please order the front panel / cover separately.PACKAGE CONTENTS:1 FreeTouch® Universal Dimmer Sensor. Touchless dimming.Mounting materials.

Important: It is not possible to connect a FreeTouch® sensor with a product from another brand. For example, you cannot create a two-way switch configuration with a conventional mechanical two-way switch. If you want to control a light from 2 or 3 different locations without physical contact or adjust its brightness through touchless dimming, you have the choice between a two-way switch configuration (for 2 control points) or a three-way switch configuration (for 3 control points). 1.) Install a FreeTouch® On/Off Light Switch (Product Number FT-S-230), a FreeTouch® Dimmer (Product Number FT-D-230), or a 230V SmartHome Switch (Product Number FT-SH-230) as the "Master." 2.) To this Master, you can then connect 1, 2, or as many FreeTouch® two-way/three-way switches (Product Number FT-X-230) as "Slaves." With this setup, each control point behaves like an independent switch or dimmer. Technical specifications: Capacitive sensor with integrated relay. Maximum load: 2400W. Minimum load: 0W. 240V / 50 Hz. 10A. 230V-240V. Neutral wire is necessary (3-wire connection). Standby power consumption is only approximately 0.18W. Can be mounted into an existing standard EU round wall box of 68 mm, either using expansion clips or screws. Please order the front panel / cover separately.PACKAGE CONTENTS: 1 FreeTouch® Sensor FT-X-230. For two-way and three-way configurations with other FreeTouch® sensors. Installation manual.

Important: THIS IS NOT A SWITCH. This impulse button triggers the flow of current as long as the hand is held in front of the sensor. It requires downstream electronics such as a dimmer or relay. Technical specifications: Capacitive sensor without integrated relay. Impulse button (NOT A SWITCH!). Maximum load: 2400W. Minimum load: 0W. 240V / 50 Hz. 10A. Not potential-free. Input and output voltage: 230V-240V. Neutral wire is necessary (3-wire connection). Standby power consumption is only approximately 0.22W. Can be mounted into an existing standard EU round wall box of 68 mm, either using expansion clips or screws. Please order the front panel / cover separately.PACKAGE CONTENTS: 1 FreeTouch® Sensor FT-T-230. Impulse button. Installation manual.

The touchless roller shutter control using FreeTouch sensors from ROHDE+ROHDE. Simply moving your hand a few centimeters above (to open) or below (to close) the sensor is sufficient. Accordingly, your roller shutter or blind motor moves in the desired direction. It can also be used, for example, to control motors for skylights and similar applications. Even through various materials (excluding metal), the sensor can detect your hand and reliably trigger the switching process. Technical specifications: Capacitive sensor with 2 sensitive areas. Adjustable response distance from approximately 0 to 8 cm. Maximum 2 x 450W relay output. 240V / 50 Hz. 10A. Not potential-free. Input and output voltage: 230V-240V. Neutral wire is necessary (3-wire connection). Can be mounted into an existing standard EU round wall box of 68 mm, either using expansion clips or screws. Please order the front panel / cover separately.PACKAGE CONTENTS: 1 FreeTouch® Sensor FT-R-230 for roller shutters and similar applications. Open/Close function. Installation manual.

Thanks to the groundbreaking FreeTouch® sensors from ROHDE+ROHDE, switching the light is now possible without any physical contact. Simply move your hand a few centimeters to the left or right of the innovative sensor. Depending on the side of approach, either one or the other circuit will be switched. Even through various materials (except metal), the sensor can detect your hand and reliably trigger the switching process. Technical specifications: Capacitive sensor. Left + right approach detection. With 2 integrated relays. Series switch / Double switch. For 2 separate circuits. Adjustable response distance approximately 0-10 cm. Maximum 2 x 4500W. Minimum 0W. 2 x 8A. Not potential-free. Input and output voltage: 230V-240V. Neutral wire is required (3-wire connection). Can be mounted into an existing standard EU round wall box, either using expansion clips (claws) or screws.A two-way switch / three-way switch configuration is not possible with this switch. For two-way or three-way configurations, choose the 1-gang switch FT-S-230. Please order the front panel / cover separately. PACKAGE CONTENTS:1 double FreeTouch® Sensor FT-S/2-230. On/Off function.Installation manual.