"AVE TOUCH"

AVE PRESENTS "AVE TOUCH", THE INVISIBLE REVOLUTIONHigh-quality, flat touch control panel made of glass. Experience comfortable switching with a gentle fingertip without pressing: the switching process is activated just 3 mm above the surface.For installation in a wall socket using a mounting frame (please order separately).Scope of delivery:Touch panel

AVE PRESENTS "AVE TOUCH", THE INVISIBLE REVOLUTIONHigh-quality, flat touch control panel made of glass. Experience comfortable switching with a gentle fingertip without pressing: the switching process is activated just 3 mm above the surface.For installation in a wall socket using a mounting frame (please order separately).Scope of delivery:Touch panel

Product InformationTouch Sensor: On/Off Switch 230V (switchable for push-button function)High-quality 230V touch sensor, touch-activated light switch. Allows for easy replacement of traditional 230V rocker switches.Integrated relay. For switching all light sources/consumers such as LEDs, transformers, halogen lamps, energy-saving lamps, incandescent bulbs, etc.The device remains hidden behind the touch panel and reliably and quickly responds to finger proximity. A gentle touch is enough.Made in the EU. Warranty: 5 years (see warranty statement). VDE certified. Proven technology, thousands of times and over many years.Installation / TechnologyInstallation in standard round flush-mounted or hollow wall boxes. Required depth of the wall box: at least 45 mm. 3-wire connection: Neutral wire required. Max 6A. Integrated LED, blue permanently on. Very low self-consumption in standby mode: 24 mA @ 230Vac (0.6 W) The integrated relay can be switched off, turning the switch into a push-button (see changeover/cross-switching). 230V input and output voltage. Per wall box, one touch sensor can be placed in the centre, or two touch sensors side by side. Various touch sensors with different functions can be combined behind a common touch panel. Available are touch light switches, touch dimmers, touch buttons, touch blind controllers.OperationA short touch turns the light on or off.Changeover/Cross-SwitchingExample changeover switching: A ceiling lamp can be switched from 2 spatially separated switches. Example cross-switching: A ceiling lamp can be switched from 3 or more spatially separated switches.One touch switch (only 1 device) is connected to any number of buttons. Each connected button thus becomes a "secondary switch" and behaves like the touch switch.Suitable Buttons Include:This touch switch, switched to push-button mode by deactivating the integrated relay. Product No. 01.99.04.010Touch push-button 230V. Product No. 01.99.04.011Any mechanical push-buttonWhy Are Three Wires Needed?The neutral wire (N) is necessary so that the touch sensor itself can be powered. Many electronic switches and sensors require continuous power, which is provided by connecting to the phase and neutral wire.The phase (L) provides the necessary voltage to switch the load (e.g. a lamp).The switch wire (L' or switched L) is needed to connect the phase to the load when the touch sensor is activated. Without this wire, the sensor could not turn the lamp on or off.5-Year Warranty - WARRANTY STATEMENTROHDE+ROHDE provides a 5-year warranty from the date of purchase. Within the warranty period, we will replace the faulty product with a flawless one, provided there is a material or manufacturing defect. A prerequisite for the warranty is the presentation of a proof of purchase. This warranty is only valid for customers residing in the European Union. Should a defect unexpectedly occur, please send the faulty item, a copy of the proof of purchase, a brief description of the defect, and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam, Germany. The warranty does not cover the following: malfunctions due to incorrect connection, overvoltage in the power grid, improper handling during installation, non-residential temperatures or humidity levels. Also excluded from the warranty are signs of wear and tear such as scratches or cracks, damage due to external influences like bending, dropping, excessive heat, mechanical impact, or the use of cleaning agents. To clean the front panels and frames, only water without additives and a soft cloth should be used. Additionally, you have statutory rights as a consumer. These rights can be exercised without restriction and independently of our warranty.

High-Quality 230V Touch Sensor with Integrated Universal DimmerHigh-quality 230V touch sensor with integrated universal dimmer. Allows for easy replacement of traditional 230V rocker switches. The device remains hidden behind the touch panel and responds to finger proximity (touch panel must be ordered separately).Made in EU.Warranty: 5 years (see warranty statement).Proven technology with thousands of successful applications over the years.Functionality:A brief tap toggles between on and off, applying the last set brightness level. Tapping and holding adjusts the brightness smoothly from dim to bright and back until released.Installation / Technical Details:This sensor must be installed individually in a wall box (due to heat generation). It must not be installed together with a second sensor in the same wall box.Installation in standard round flush-mounted or cavity wall boxes.Required depth of wall box: At least 45 mm.3-wire connection: Neutral wire required.Integrated LED, blue, constantly illuminated.Very low power consumption in standby mode: 24 mA @ 230Vac (0.6 W)Touch sensors with different functions can be individually combined behind a common touch panel. Available touch devices include touch light switches, touch dimmers, touch momentary switches, and touch blind controls.230V input and output voltage.Phase-cut and phase-switching dimmer.For resistive and inductive loads = dimmable LED lamps 3-160W, 3-220W incandescent and halogen lamps, dimmable toroidal transformers for low-voltage halogen lamps 20-220W, dimmable electronic transformers for low-voltage halogen lamps 20-220W, dimmable CFL lamps ("energy-saving lamps") 3-220W. Max. input: 7.6 mA. Integrated LED, blue, constantly illuminated.2-Way or 3-Way Switching:2-Way Switching Example: A ceiling light can be dimmed from 2 spatially separated dimmers.3-Way Switching Example: A ceiling light can be dimmed from 3 or more spatially separated dimmers.One touch dimmer (only 1 device) can be connected to any number of momentary switches. Each connected momentary switch then functions as a "slave switch" and behaves like the touch dimmer.Important: Please note that a momentary switch is not an on/off switch. A momentary switch only emits a current pulse.Momentary Switches that Can Be Used: Touch Momentary Switch 230V. Product No. 01.99.04.011Any momentary switch of mechanical constructionWhy Are Three Wires Required?The neutral wire (N) is necessary to supply power to the touch sensor itself. Many electronic switches and sensors require a continuous power supply to function, which is achieved by connecting to both the live and neutral wires.The live wire (L) provides the necessary voltage to switch the load (e.g., a lamp).The switching wire (L' or L-out) is required to connect the live wire to the load when the touch sensor is activated. Without this wire, the sensor would not be able to switch the lamp on or off.5-Year Warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year warranty from the date of purchase. During the warranty period, we will replace a defective product with a faultless product, provided there is a material or manufacturing defect. A purchase receipt is required to claim the warranty. This warranty is valid only for customers located within the European Union. Should a defect occur unexpectedly, please send the defective item, a copy of the receipt, a brief description of the fault, and your address to ROHDE+ROHDE®. The warranty provider is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam, Germany. The warranty does not cover: malfunctions due to incorrect connection, overvoltage in the power supply, incorrect handling during installation, atypical temperatures or humidity levels. Also excluded from the warranty are signs of wear such as scratches or cracks, damage caused by external influences such as bending, dropping, excessive heat exposure, mechanical impacts, or the use of cleaning agents. Only water without additives and a soft cloth should be used to clean the front panels and frames. Additionally, you have statutory consumer rights regarding defects. These rights can be exercised independently of and in addition to our warranty.

High-Quality 230V Touch Sensor (Momentary Switch)High-quality 230V touch sensor, touch-operated momentary switch. Allows for easy replacement of traditional 230V rocker momentary switches.Important: Please note that a momentary switch is not an on/off switch. A momentary switch only emits a current pulse.Protection class: IP 40Power supply: 230V AC 50/60HzPermissible deviation: -15% +10%20.6mA at 230V AC (0.3W)Static TRIAC output - monostable operationResistive load directly controlled with alternating current: 1AMade in EU.Warranty: 5 years (see warranty statement).VDE certified.Proven technology with thousands of successful applications over the years.Applications:As a "slave switch," you can implement intermediate and cross-switching with other ROHDE+ROHDE touch sensors (switches, dimmers, blind controls).For controlling downstream electronics (e.g., external dimmers or relays).For integration into home automation systems.Function:Similar to a doorbell button, the contact remains closed only while the touch sensor is being touched. The sensor responds to proximity at approximately 2 mm above the front panel.2-Way or 3-Way Switching:For a 2-way or 3-way setup, any number of momentary switches can be connected to 1 on/off touch switch, touch dimmer, or touch blind control. Each connected momentary switch then behaves like the on/off touch switch, touch dimmer, or touch blind control.Installation/Technical Details:Installation in standard round flush-mounted or cavity wall boxes.Required depth of wall box: At least 45 mm.3-wire connection: Neutral wire required.Max 2A.Integrated LED, blue, constantly illuminated.Very low power consumption in standby mode: 24 mA @ 230Vac (0.6 W)230V input and output voltage.Each wall box can accommodate either 1 touch sensor in the centre or 2 touch sensors side by side.Touch sensors with different functions can be combined individually behind a common touch panel.Why Are Three Wires Required?The neutral wire (N) is necessary to supply power to the touch sensor itself. Many electronic switches and sensors require a continuous power supply to function, which is achieved by connecting to both the live and neutral wires.The live wire (L) provides the necessary voltage to switch the load (e.g., a lamp).The switching wire (L' or L-out) is required to connect the live wire to the load when the touch sensor is activated. Without this wire, the sensor would not be able to switch the lamp on or off.5-Year Warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year warranty from the date of purchase. During the warranty period, we will replace a defective product with a faultless product, provided there is a material or manufacturing defect. A purchase receipt is required to claim the warranty. This warranty is valid only for customers located within the European Union. Should a defect occur unexpectedly, please send the defective item, a copy of the receipt, a brief description of the fault, and your address to ROHDE+ROHDE®. The warranty provider is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam, Germany. The warranty does not cover: malfunctions due to incorrect connection, overvoltage in the power supply, incorrect handling during installation, atypical temperatures or humidity levels. Also excluded from the warranty are signs of wear such as scratches or cracks, damage caused by external influences such as bending, dropping, excessive heat exposure, mechanical impacts, or the use of cleaning agents. Only water without additives and a soft cloth should be used to clean the front panels and frames. Additionally, you have statutory consumer rights regarding defects. These rights can be exercised independently of and in addition to our warranty.

Touch Sensor for 230V ConnectionTouch sensor for connection to 230V. For controlling shutters, blinds, and other slow electric motors with a 230V connection. The device remains hidden behind the touch panel and reliably responds to finger proximity. A gentle tap is enough.Made in EU.Warranty: 5 years (see warranty statement)Proven technology with thousands of successful applications over the years.Installation / Technical Details:Short press for fully automatic opening or closing.The process can be interrupted at any point.The shutter touch sensor includes all functions in one device: Open - Stop - Close.Each wall box can optionally hold 1 touch sensor in the middle, or 2 touch sensors side by side. For 1 shutter, 1 touch sensor is required.Installation in standard flush-mounted or cavity wall boxes.Required depth of wall box: At least 45 mm.3-wire connection: Neutral wire required.2 relay outputs. N0, 2A, 230V. Monostable or bistable mode selectable.Different touch sensors with various functions can be combined behind a common touch panel. Available touch devices include touch light switches, touch dimmers, touch momentary switches, and touch shutter controls.The sensor responds to proximity approximately 2 mm above the front panel.Built-in LED (constantly illuminated).Why Are Three Wires Required?The neutral wire (N) is necessary to supply power to the touch sensor itself. Many electronic switches and sensors require a continuous power supply to function, which is achieved by connecting both the live and neutral wires.The live wire (L) provides the necessary voltage to switch the load (e.g., a lamp).The switching wire (L' or L-out) is required to connect the live wire to the load when the touch sensor is activated. Without this wire, the sensor would not be able to switch the lamp on or off.5-Year Warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year warranty from the date of purchase. During the warranty period, we will replace a defective product with a faultless product, provided there is a material or manufacturing defect. A purchase receipt is required to claim the warranty. This warranty is valid only for customers located within the European Union. Should a defect occur unexpectedly, please send the defective item, a copy of the receipt, a brief description of the fault, and your address to ROHDE+ROHDE®. The warranty provider is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam, Germany. The warranty does not cover: malfunctions or damage due to incorrect connection, overvoltage in the power supply, incorrect handling during installation, atypical temperatures or humidity levels. Also excluded from the warranty are signs of wear such as scratches or cracks, damage caused by external influences such as bending, dropping, excessive heat exposure, mechanical impacts, or the use of cleaning agents. Only water without additives and a soft cloth should be used to clean the front panels and frames. Additionally, you have statutory consumer rights regarding defects. These rights can be exercised independently of and in addition to our warranty.

The electronic switch with potential-free output relay is a control device with a built-in touch-sensitive sensor. Operates with 12-24V. It can switch loads up to 230Vac. Can be used as an on/off switch through the integrated potential-free relay output (1P NO 1A 230V) or as a momentary switch. For two-way and cross-switching, 2 or more of these sensors must be connected. The 12-24V touch button can be integrated into the existing home automation system (subject to feasibility testing and without guarantee. An interface may be required).Made in the EU.Warranty: 5 years (see warranty statement).VDE certified.Thousands of successful applications and proven technology over the years.Installation / Technical Details:Installation in standard round flush-mounted boxes or cavity wall boxes.Required depth of wall box: at least 35 mm.3-wire connection: neutral wire required.Power supply: 12 VAC 50 Hz or 12 VDC.Power supply: 24 VAC 50 Hz or 24 VDC.Load capacities with 230 VAC: resistive load 1 A, incandescent lamp 1 A, electric motor 1A.Integrated LED, blue constantly illuminated.The integrated relay can be switched off, making the switch a push button (see two-way/cross-switching).Each wall box can optionally house 1 touch sensor in the middle or 2 touch sensors side by side.Functionality:The device remains invisible behind the touch panel and responds reliably and quickly to the proximity of a finger. A gentle tap is sufficient.5-Year Warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year warranty from the date of purchase. During the warranty period, we will replace a defective product with a faultless product, provided there is a material or manufacturing defect. A purchase receipt is required to claim the warranty. This warranty is valid only for customers within the European Union. Should a defect occur unexpectedly, please send the defective item, a copy of the receipt, a brief description of the fault, and your address to ROHDE+ROHDE®. The warranty provider is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam. The warranty does not cover: malfunctions due to incorrect connection, overvoltage in the power supply, incorrect handling during installation, atypical temperatures or humidity. Also excluded from the warranty are signs of wear such as scratches or cracks, damage caused by external influences such as bending, dropping, excessive heat exposure, mechanical impacts, or the use of cleaning agents. Only water without additives and a soft cloth should be used to clean the front panels and frames. Additionally, you have statutory consumer rights regarding defects. These rights can be exercised without limitation and independently of our warranty.

Frame for wall boxes. The inserts from Ave and ROHDE + ROHDE are used for installation in AVE mounting frames. The AVE mounting frames are then placed in the wall boxes.Size: 3MSuitable for wall boxes mentioned below: 3 modules S44 and S45 oversized rectangular box screws. Fastening centers 83.5 mm. Dimensions (L H D): 112 x 74 x 52 m.

Product description:Wall socket for flush installation for masonry - screw fastening center 83.5 mm - supplied with mortar-proof cardboard, spirit level (attached to the box) and system 44. 3 modules. Frame dimensions 167x148x60.

Product description:AVE flush-mounted one-gang junction box for cavity walls and flush installation.3 module box - screw fastening center 83.5 mm - delivery with template, spirit level and system 44 3 module frame - dimensions 167x148x60mm