Touch sensor insert 12-24V switch and momentary switch
The electronic switch with potential-free output relay is a control device with a built-in touch-sensitive sensor. Operates with 12-24V. It can switch loads up to 230Vac. Can be used as an on/off switch through the integrated potential-free relay output (1P NO 1A 230V) or as a momentary switch.
For two-way and cross-switching, 2 or more of these sensors must be connected.
The 12-24V touch button can be integrated into the existing home automation system (subject to feasibility testing and without guarantee. An interface may be required).
Made in the EU.
Warranty: 5 years (see warranty statement).
VDE certified.
Thousands of successful applications and proven technology over the years.
Installation / Technical Details:
- Installation in standard round flush-mounted boxes or cavity wall boxes.
- Required depth of wall box: at least 35 mm.
- 3-wire connection: neutral wire required.
- Power supply: 12 VAC 50 Hz or 12 VDC.
- Power supply: 24 VAC 50 Hz or 24 VDC.
- Load capacities with 230 VAC: resistive load 1 A, incandescent lamp 1 A, electric motor 1A.
- Integrated LED, blue constantly illuminated.
- The integrated relay can be switched off, making the switch a push button (see two-way/cross-switching).
- Each wall box can optionally house 1 touch sensor in the middle or 2 touch sensors side by side.
Functionality:
- The device remains invisible behind the touch panel and responds reliably and quickly to the proximity of a finger. A gentle tap is sufficient.
5-Year Warranty - WARRANTY STATEMENT:
ROHDE+ROHDE provides a 5-year warranty from the date of purchase. During the warranty period, we will replace a defective product with a faultless product, provided there is a material or manufacturing defect. A purchase receipt is required to claim the warranty. This warranty is valid only for customers within the European Union. Should a defect occur unexpectedly, please send the defective item, a copy of the receipt, a brief description of the fault, and your address to ROHDE+ROHDE®. The warranty provider is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam. The warranty does not cover: malfunctions due to incorrect connection, overvoltage in the power supply, incorrect handling during installation, atypical temperatures or humidity. Also excluded from the warranty are signs of wear such as scratches or cracks, damage caused by external influences such as bending, dropping, excessive heat exposure, mechanical impacts, or the use of cleaning agents. Only water without additives and a soft cloth should be used to clean the front panels and frames. Additionally, you have statutory consumer rights regarding defects. These rights can be exercised without limitation and independently of our warranty.