Frame for wall boxes. The inserts from Ave and ROHDE + ROHDE are used for installation in AVE mounting frames. The AVE mounting frames are then placed in the wall boxes.Size: ASuitable for wall boxes mentioned below: Round with diameter: 60 mm. Stone wall box with the possibility of screwing.Suitable for distance between wall boxes (center to center):71 mm center distance, connectable.
Colour:
White
|
Design:
For square cutouts
|
Surface:
Shiny
The modern Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with square socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Colour:
Black
|
Design:
For square cutouts
|
Surface:
Matte
The modern Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with square socket cut-out.Matt high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Colour:
Black
|
Design:
For square cutouts
|
Surface:
Shiny
The modern Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with square socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Technology / Typ:
On / off + 2-Way switch
|
Material:
Brushed Brass
Individual design and high-quality mechanics characterise retro switches from the Cambridge collection. Toggle switches not only look good, they are also practical and functional in operation. Thanks to their timeless design, ROHDE+ROHDE toggle light switches are suitable for classic interiors as well as for modern interior design.The mechanism is manufactured by a traditional international company near Venice and complies with EU regulations. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Toggle switch mechanism with toggle lever. 10A, 250V.Function: Latching up (on) and latching down (off). For each wall box, 1 toggle switch can be placed in the middle or 2 toggle switches can be placed next to each other.Rocker switches with different functions can be combined individually in a common front panel.Installation Retro inserts:For installation in an AVE mounting frame (automatically supplied when the Cambridge front panel is ordered). Scope of delivery: Mechanism with toggle lever.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.
Product InformationTouch Sensor: On/Off Switch 230V (switchable for push-button function)High-quality 230V touch sensor, touch-activated light switch. Allows for easy replacement of traditional 230V rocker switches.Integrated relay. For switching all light sources/consumers such as LEDs, transformers, halogen lamps, energy-saving lamps, incandescent bulbs, etc.The device remains hidden behind the touch panel and reliably and quickly responds to finger proximity. A gentle touch is enough.Made in the EU. Warranty: 5 years (see warranty statement). VDE certified. Proven technology, thousands of times and over many years.Installation / TechnologyInstallation in standard round flush-mounted or hollow wall boxes. Required depth of the wall box: at least 45 mm. 3-wire connection: Neutral wire required. Max 6A. Integrated LED, blue permanently on. Very low self-consumption in standby mode: 24 mA @ 230Vac (0.6 W) The integrated relay can be switched off, turning the switch into a push-button (see changeover/cross-switching). 230V input and output voltage. Per wall box, one touch sensor can be placed in the centre, or two touch sensors side by side. Various touch sensors with different functions can be combined behind a common touch panel. Available are touch light switches, touch dimmers, touch buttons, touch blind controllers.OperationA short touch turns the light on or off.Changeover/Cross-SwitchingExample changeover switching: A ceiling lamp can be switched from 2 spatially separated switches. Example cross-switching: A ceiling lamp can be switched from 3 or more spatially separated switches.One touch switch (only 1 device) is connected to any number of buttons. Each connected button thus becomes a "secondary switch" and behaves like the touch switch.Suitable Buttons Include:This touch switch, switched to push-button mode by deactivating the integrated relay. Product No. 01.99.04.010Touch push-button 230V. Product No. 01.99.04.011Any mechanical push-buttonWhy Are Three Wires Needed?The neutral wire (N) is necessary so that the touch sensor itself can be powered. Many electronic switches and sensors require continuous power, which is provided by connecting to the phase and neutral wire.The phase (L) provides the necessary voltage to switch the load (e.g. a lamp).The switch wire (L' or switched L) is needed to connect the phase to the load when the touch sensor is activated. Without this wire, the sensor could not turn the lamp on or off.5-Year Warranty - WARRANTY STATEMENTROHDE+ROHDE provides a 5-year warranty from the date of purchase. Within the warranty period, we will replace the faulty product with a flawless one, provided there is a material or manufacturing defect. A prerequisite for the warranty is the presentation of a proof of purchase. This warranty is only valid for customers residing in the European Union. Should a defect unexpectedly occur, please send the faulty item, a copy of the proof of purchase, a brief description of the defect, and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam, Germany. The warranty does not cover the following: malfunctions due to incorrect connection, overvoltage in the power grid, improper handling during installation, non-residential temperatures or humidity levels. Also excluded from the warranty are signs of wear and tear such as scratches or cracks, damage due to external influences like bending, dropping, excessive heat, mechanical impact, or the use of cleaning agents. To clean the front panels and frames, only water without additives and a soft cloth should be used. Additionally, you have statutory rights as a consumer. These rights can be exercised without restriction and independently of our warranty.
Colour:
White / Chrome
|
Design:
For round cutouts
|
Surface:
Shiny
The attractive socket inserts are framed with an elegant, round decorative ring and harmonise perfectly with the retro light switches by ROHDE+ROHDE. These Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with round socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Technology / Typ:
On / off + 2-Way switch
|
Material:
Glossy Chrome
Individual design and high-quality mechanics characterise retro switches from the Cambridge collection. Toggle switches not only look good, they are also practical and functional in operation. Thanks to their timeless design, ROHDE+ROHDE toggle light switches are suitable for classic interiors as well as for modern interior design.The mechanism is manufactured by a traditional international company near Venice and complies with EU regulations. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Toggle switch mechanism with toggle lever. 10A, 250V.Function: Latching up (on) and latching down (off). For each wall box, 1 toggle switch can be placed in the middle or 2 toggle switches can be placed next to each other.Rocker switches with different functions can be combined individually in a common front panel.Installation Retro inserts:For installation in an AVE mounting frame (automatically supplied when the Cambridge front panel is ordered). Scope of delivery: Mechanism with toggle lever.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.
Colour:
White / Brass
|
Design:
For round cutouts
|
Surface:
Shiny
The attractive socket inserts are framed with an elegant, round decorative ring and harmonise perfectly with the retro light switches by ROHDE+ROHDE. These Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with round socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Individual design and high-quality mechanics characterise retro push-buttons from the Cambridge collection. Toggle switches not only look good, they are also practical and functional to operate. Thanks to their timeless design, ROHDE+ROHDE toggle switches are suitable for classic interiors as well as for modern interior design.The mechanism is manufactured by a traditional international company near Venice and complies with EU regulations. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Push-button mechanism with toggle lever. 10A, 250V.Function: Neutral position up, contact down. Resilient.For each wall box, either 1 toggle switch can be placed in the middle or 2 toggle switches can be placed next to each other.Toggle switches with different functions can be combined individually in a common front panel.Installation Retro inserts:For installation in an AVE mounting frame (automatically supplied when the Cambridge front panel is ordered). Scope of delivery: Mechanism with toggle lever.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.
Individual design and high-quality mechanics characterise retro push-buttons from the Cambridge collection. Toggle switches not only look good, they are also practical and functional to operate. Thanks to their timeless design, ROHDE+ROHDE toggle switches are suitable for classic interiors as well as for modern interior design.The mechanism is manufactured by a traditional international company near Venice and complies with EU regulations. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Push-button mechanism with toggle lever. 10A, 250V.Function: Neutral position up, contact down. Resilient.For each wall box, either 1 toggle switch can be placed in the middle or 2 toggle switches can be placed next to each other.Toggle switches with different functions can be combined individually in a common front panel.Installation Retro inserts:For installation in an AVE mounting frame (automatically supplied when the Cambridge front panel is ordered). Scope of delivery: Mechanism with toggle lever.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.
High-Quality 230V Touch Sensor (Momentary Switch)High-quality 230V touch sensor, touch-operated momentary switch. Allows for easy replacement of traditional 230V rocker momentary switches.Important: Please note that a momentary switch is not an on/off switch. A momentary switch only emits a current pulse.Protection class: IP 40Power supply: 230V AC 50/60HzPermissible deviation: -15% +10%20.6mA at 230V AC (0.3W)Static TRIAC output - monostable operationResistive load directly controlled with alternating current: 1AMade in EU.Warranty: 5 years (see warranty statement).VDE certified.Proven technology with thousands of successful applications over the years.Applications:As a "slave switch," you can implement intermediate and cross-switching with other ROHDE+ROHDE touch sensors (switches, dimmers, blind controls).For controlling downstream electronics (e.g., external dimmers or relays).For integration into home automation systems.Function:Similar to a doorbell button, the contact remains closed only while the touch sensor is being touched. The sensor responds to proximity at approximately 2 mm above the front panel.2-Way or 3-Way Switching:For a 2-way or 3-way setup, any number of momentary switches can be connected to 1 on/off touch switch, touch dimmer, or touch blind control. Each connected momentary switch then behaves like the on/off touch switch, touch dimmer, or touch blind control.Installation/Technical Details:Installation in standard round flush-mounted or cavity wall boxes.Required depth of wall box: At least 45 mm.3-wire connection: Neutral wire required.Max 2A.Integrated LED, blue, constantly illuminated.Very low power consumption in standby mode: 24 mA @ 230Vac (0.6 W)230V input and output voltage.Each wall box can accommodate either 1 touch sensor in the centre or 2 touch sensors side by side.Touch sensors with different functions can be combined individually behind a common touch panel.Why Are Three Wires Required?The neutral wire (N) is necessary to supply power to the touch sensor itself. Many electronic switches and sensors require a continuous power supply to function, which is achieved by connecting to both the live and neutral wires.The live wire (L) provides the necessary voltage to switch the load (e.g., a lamp).The switching wire (L' or L-out) is required to connect the live wire to the load when the touch sensor is activated. Without this wire, the sensor would not be able to switch the lamp on or off.5-Year Warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year warranty from the date of purchase. During the warranty period, we will replace a defective product with a faultless product, provided there is a material or manufacturing defect. A purchase receipt is required to claim the warranty. This warranty is valid only for customers located within the European Union. Should a defect occur unexpectedly, please send the defective item, a copy of the receipt, a brief description of the fault, and your address to ROHDE+ROHDE®. The warranty provider is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam, Germany. The warranty does not cover: malfunctions due to incorrect connection, overvoltage in the power supply, incorrect handling during installation, atypical temperatures or humidity levels. Also excluded from the warranty are signs of wear such as scratches or cracks, damage caused by external influences such as bending, dropping, excessive heat exposure, mechanical impacts, or the use of cleaning agents. Only water without additives and a soft cloth should be used to clean the front panels and frames. Additionally, you have statutory consumer rights regarding defects. These rights can be exercised independently of and in addition to our warranty.
Technology / Typ:
Roller blind SWITCH
|
Colour:
Graphite black
|
Material type:
Standard
|
Size:
Slim
|
Surface:
Matte
Mechanical blind switch with intuitive operation:Button Up opens the blind.Push-button DOWN closes the blinds.STOP is possible at any time. A narrow roller shutter switch contains all 3 functions UP - STOP - DOWN. The pressed button latches until the other button is pressed.For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE.Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Narrow design (half socket width). Can be optionally installed in a wall socket:This unit + gap filler.2 pieces of these units next to each other.This unit and another narrow unit side by side.Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.2P, 10 A, 230 V. Latching buttons, mutually locking.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.
High-Quality 230V Touch Sensor with Integrated Universal DimmerHigh-quality 230V touch sensor with integrated universal dimmer. Allows for easy replacement of traditional 230V rocker switches. The device remains hidden behind the touch panel and responds to finger proximity (touch panel must be ordered separately).Made in EU.Warranty: 5 years (see warranty statement).Proven technology with thousands of successful applications over the years.Functionality:A brief tap toggles between on and off, applying the last set brightness level. Tapping and holding adjusts the brightness smoothly from dim to bright and back until released.Installation / Technical Details:This sensor must be installed individually in a wall box (due to heat generation). It must not be installed together with a second sensor in the same wall box.Installation in standard round flush-mounted or cavity wall boxes.Required depth of wall box: At least 45 mm.3-wire connection: Neutral wire required.Integrated LED, blue, constantly illuminated.Very low power consumption in standby mode: 24 mA @ 230Vac (0.6 W)Touch sensors with different functions can be individually combined behind a common touch panel. Available touch devices include touch light switches, touch dimmers, touch momentary switches, and touch blind controls.230V input and output voltage.Phase-cut and phase-switching dimmer.For resistive and inductive loads = dimmable LED lamps 3-160W, 3-220W incandescent and halogen lamps, dimmable toroidal transformers for low-voltage halogen lamps 20-220W, dimmable electronic transformers for low-voltage halogen lamps 20-220W, dimmable CFL lamps ("energy-saving lamps") 3-220W. Max. input: 7.6 mA. Integrated LED, blue, constantly illuminated.2-Way or 3-Way Switching:2-Way Switching Example: A ceiling light can be dimmed from 2 spatially separated dimmers.3-Way Switching Example: A ceiling light can be dimmed from 3 or more spatially separated dimmers.One touch dimmer (only 1 device) can be connected to any number of momentary switches. Each connected momentary switch then functions as a "slave switch" and behaves like the touch dimmer.Important: Please note that a momentary switch is not an on/off switch. A momentary switch only emits a current pulse.Momentary Switches that Can Be Used: Touch Momentary Switch 230V. Product No. 01.99.04.011Any momentary switch of mechanical constructionWhy Are Three Wires Required?The neutral wire (N) is necessary to supply power to the touch sensor itself. Many electronic switches and sensors require a continuous power supply to function, which is achieved by connecting to both the live and neutral wires.The live wire (L) provides the necessary voltage to switch the load (e.g., a lamp).The switching wire (L' or L-out) is required to connect the live wire to the load when the touch sensor is activated. Without this wire, the sensor would not be able to switch the lamp on or off.5-Year Warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year warranty from the date of purchase. During the warranty period, we will replace a defective product with a faultless product, provided there is a material or manufacturing defect. A purchase receipt is required to claim the warranty. This warranty is valid only for customers located within the European Union. Should a defect occur unexpectedly, please send the defective item, a copy of the receipt, a brief description of the fault, and your address to ROHDE+ROHDE®. The warranty provider is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam, Germany. The warranty does not cover: malfunctions due to incorrect connection, overvoltage in the power supply, incorrect handling during installation, atypical temperatures or humidity levels. Also excluded from the warranty are signs of wear such as scratches or cracks, damage caused by external influences such as bending, dropping, excessive heat exposure, mechanical impacts, or the use of cleaning agents. Only water without additives and a soft cloth should be used to clean the front panels and frames. Additionally, you have statutory consumer rights regarding defects. These rights can be exercised independently of and in addition to our warranty.
Colour:
White
|
Design:
For round cutouts
|
Surface:
Shiny
The attractive socket inserts are framed with an elegant, round decorative ring and harmonise perfectly with the retro light switches by ROHDE+ROHDE. These Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with round socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Colour:
Silver
|
Design:
For square cutouts
|
Surface:
Shiny
The modern Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with square socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Technology / Typ:
Rj45
|
Colour:
White
|
Material type:
Standard
|
Size:
Slim
|
Surface:
Shiny
RJ45 junction box for data lines. For connection of network devices. Installation in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Narrow design (half socket width). Can be optionally installed in a wall socket:1 narrow unit like this + gap closer2 narrow units like this or similar side by sideInstallation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.RJ45 Cat 6.3M plug.8 contacts.Integrated sliding opening as dust protection. Top with a small labelling field5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.
The electronic switch with potential-free output relay is a control device with a built-in touch-sensitive sensor. Operates with 12-24V. It can switch loads up to 230Vac. Can be used as an on/off switch through the integrated potential-free relay output (1P NO 1A 230V) or as a momentary switch. For two-way and cross-switching, 2 or more of these sensors must be connected. The 12-24V touch button can be integrated into the existing home automation system (subject to feasibility testing and without guarantee. An interface may be required).Made in the EU.Warranty: 5 years (see warranty statement).VDE certified.Thousands of successful applications and proven technology over the years.Installation / Technical Details:Installation in standard round flush-mounted boxes or cavity wall boxes.Required depth of wall box: at least 35 mm.3-wire connection: neutral wire required.Power supply: 12 VAC 50 Hz or 12 VDC.Power supply: 24 VAC 50 Hz or 24 VDC.Load capacities with 230 VAC: resistive load 1 A, incandescent lamp 1 A, electric motor 1A.Integrated LED, blue constantly illuminated.The integrated relay can be switched off, making the switch a push button (see two-way/cross-switching).Each wall box can optionally house 1 touch sensor in the middle or 2 touch sensors side by side.Functionality:The device remains invisible behind the touch panel and responds reliably and quickly to the proximity of a finger. A gentle tap is sufficient.5-Year Warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year warranty from the date of purchase. During the warranty period, we will replace a defective product with a faultless product, provided there is a material or manufacturing defect. A purchase receipt is required to claim the warranty. This warranty is valid only for customers within the European Union. Should a defect occur unexpectedly, please send the defective item, a copy of the receipt, a brief description of the fault, and your address to ROHDE+ROHDE®. The warranty provider is ROHDE+ROHDE Ursula Rohde, David-Gilly-Strasse 1, D-14469 Potsdam. The warranty does not cover: malfunctions due to incorrect connection, overvoltage in the power supply, incorrect handling during installation, atypical temperatures or humidity. Also excluded from the warranty are signs of wear such as scratches or cracks, damage caused by external influences such as bending, dropping, excessive heat exposure, mechanical impacts, or the use of cleaning agents. Only water without additives and a soft cloth should be used to clean the front panels and frames. Additionally, you have statutory consumer rights regarding defects. These rights can be exercised without limitation and independently of our warranty.
Colour:
Silver
|
Design:
For round cutouts
|
Surface:
Shiny
The attractive socket inserts are framed with an elegant, round decorative ring and harmonise perfectly with the retro light switches by ROHDE+ROHDE. These Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with round socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Technology / Typ:
Blank insert
|
Colour:
White
|
Material type:
Standard
|
Size:
Super Slim
|
Surface:
Shiny
If a narrow technical insert (for example USB charger) is placed individually in the centre, a narrow gap is created on the left and right. These two gaps are closed with two of these blind covers / gap closers. Important: Always order 2 pieces. For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE. For installation in standard round flush-mounted boxes ø 60mm or cavity boxes ø 68mm.
Colour:
Black / Chrome
|
Design:
For round cutouts
|
Surface:
Shiny
The attractive socket inserts are framed with an elegant, round decorative ring and harmonise perfectly with the retro light switches by ROHDE+ROHDE. These Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with round socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Colour:
Black
|
Design:
For round cutouts
|
Surface:
Shiny
The attractive socket inserts are framed with an elegant, round decorative ring and harmonise perfectly with the retro light switches by ROHDE+ROHDE. These Schuko socket outlets are manufactured by a renowned, internationally active company near Venice and comply with EU-wide regulations. Through many years of daily use, they have proven themselves and are very popular with private customers as well as in first-class 5-star hotels. The high level of customer satisfaction is testimony to the quality of this product.For front panels and frames with round socket cut-out.Glossy high-quality plasticSchuko socket insert type F (e.g. for Germany, Austria, Netherlands, Spain and many other countries)2P+E, 16A, 250VInvisible increased contact protectionSuitable for wall boxes ø 60 mm with min. 45 mm depthFixation in the wall box with screwsFixing the cables with screws
Technology / Typ:
USB
|
Colour:
White
|
Material type:
Standard
|
Size:
Slim
|
Surface:
Shiny
For charging smartphones, tablets and other devices.For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE.Made in EU.Warranty: 5 years (see warranty declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Narrow design (half socket width). Can be optionally installed in a wall socket:This unit + gap filler.2 pieces of these units next to each other.This unit and another narrow unit side by side.Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.110-230V. 50-60 Hz. Maximum 3A. Standby consumption only 0.1 W.
5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.
Technology / Typ:
Blank insert
|
Colour:
Graphite black
|
Material type:
Standard
|
Size:
Slim
|
Surface:
Matte
For placing next to a narrow technical insert to close the gap in the frame cut-out. This blank cover / gap filler has half the width of a socket insert.Examples of use:Technical use is placed on the left, this gap filler on the right.Technical use is placed on the right, this gap filler on the left.For use in frames (socket frames with square cut-out) from ROHDE+ROHDE or from AVE. For installation in standard round flush-mounted boxes ø 60mm or cavity boxes ø 68mm.
Individual design and high-quality mechanics characterise retro switches from the Cambridge collection. Toggle switches not only look good, they are also practical and functional in operation. Thanks to their timeless design, ROHDE+ROHDE toggle light switches are suitable for classic interiors as well as for modern interior design.The mechanism is manufactured by a traditional international company near Venice and complies with EU regulations. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Toggle switch mechanism with toggle lever. 10A, 250V.Function: Latching up (on) and latching down (off). For each wall box, 1 toggle switch can be placed in the middle or 2 toggle switches can be placed next to each other.Rocker switches with different functions can be combined individually in a common front panel.Installation Retro inserts:For installation in an AVE mounting frame (automatically supplied when the Cambridge front panel is ordered). Scope of delivery: Mechanism with toggle lever.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.
The operation of the roller shutter switches with toggle lever is particularly practical and intuitive: The toggle lever has a neutral middle position. To open the blind, simply place the toggle lever upwards. To close it, the toggle lever is moved downwards accordingly.The mechanism is manufactured by a traditional international company near Venice and complies with EU regulations. Made in EU.Guarantee: 5 years (see guarantee declaration).Technology that has been tried and tested thousands of times and for years.Installation / Technology:Installation in standard round flush-mounted boxes ø 60 mm or cavity wall boxes ø 68 mm.Required depth of the wall box: At least 45 mm.Toggle switch mechanism with toggle lever. 10A, 250V.Function: Neutral middle position. Latching up and latching down. For each wall box, 1 toggle switch can be placed in the middle or 2 toggle switches can be placed next to each other.Rocker switches with different functions can be combined individually in a common front panel.Installation Retro inserts:For installation in an AVE mounting frame (automatically supplied when the Cambridge front panel is ordered). Scope of delivery: Mechanism with toggle lever.5 year warranty - WARRANTY STATEMENT:ROHDE+ROHDE provides a 5-year guarantee from the date of purchase. Within the warranty period, we will exchange the defective product for a faultless product, provided there is a material or manufacturing defect. A prerequisite for the granting of the guarantee is the presentation of a proof of purchase. This guarantee only applies to customers domiciled in the European Union. If, contrary to expectations, a defect is found, please send the faulty item, a copy of the purchase receipt, a brief description of the fault and your address to ROHDE+ROHDE®. The guarantor is ROHDE+ROHDE UG (haftungsbeschränkt) & Co. KG, David-Gilly-Strasse 1, D-14469 Potsdam. Excluded from the guarantee are in particular: Malfunctions due to incorrect connection, overvoltage in the power supply system, incorrect handling during installation, temperatures or air humidity untypical of the living space. Also excluded from the warranty are signs of use such as scratches or cracks, damage due to external influences such as bending, falling, excessive heat, mechanical action or the use of cleaning agents. Only water without any other additives and a soft cloth may be used to clean the front panels and frames. In addition, you have the rights under the statutory liability for defects as a consumer. These rights can be asserted against us without restriction and independently of our guarantee.
Variants from €22.74*
€48.62*
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Google Pay payments
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Amazon Pay
CAPTCHA integration
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
PayPal payments
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Timezone:
The cookie is used to provide the system with the user's current time zone.
YouTube video
Wishlist
Userlike Messenger:
Required in order to use this website's live chat functionality.
Google Tag Manager
Google Tag Manager
Allows Google to collect personal data for online advertising and marketing.
Google Advertising
Shopware Analytics is an analytics service for tracking shopping behavior on this webshop, provided by shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany) in joint responsibility (see also the data protection information). The legal basis for data processing is Art. 6 para. 1 s. 1 lit. a GDPR. If data is stored locally, please refer to our privacy policy for further details on data processing.
The recipient of the data is shopware AG and IT service providers. Technologies used include local storage. The collected data includes customer group, pages visited, click paths, date and time of visit, information about the end device used (resolution, resolution density, operating system), referrer URL, information about the browser used, locale, search queries, time zone. The purpose of data collection is for marketing, analysis, and statistical purposes.
Data processing takes place within the European Union. If you have any questions about data protection, you can contact the data protection officer at legal@shopware.com. Further information can be found at https://www.shopware.com/en/privacy/website.
Stored data:
Shopware Analytics adds the following information to your browser's local storage until consent is revoked: _swa_anonymousId (a unique identifier of the visitor), _swa_userTraits (user traits of the visitor).
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
These cookies are used for statistics and shop performance metrics.
Google Tagmanager
Conversion and usertracking via Google Tag Manager
Google Analytics
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
This website uses cookies to ensure you get the best experience on our website... More information.